Tomahawk 3S 6000mAh 60C Hard Case LiPo Battery – 11.1V

Tomahawk 3S 6000mAh 60C Hard Case LiPo Battery – 11.1V

Built for RC enthusiasts who demand strong acceleration, high-current output, and long-lasting endurance, the Tomahawk 3S 6000mAh 60C LiPo Battery delivers powerful and consistent performance for demanding RC applications.

With an 11.1V 3S configuration, 6000mAh capacity, and a 60C continuous discharge rating, this high-rate LiPo battery is designed to provide strong burst power and stable output during aggressive driving and racing. Its reinforced five-sided metal armor adds structural protection against impacts while maintaining a compact form factor for a wide range of RC models.

High-Rate Power for Demanding RC Use

The 60C continuous discharge rating is designed for high-current applications that require fast throttle response and sustained power delivery. With a theoretical continuous discharge capability of up to 360A based on the 6000mAh capacity and 60C rating, this battery is built to support demanding RC setups.

The 3S 11.1V configuration provides a strong balance of voltage, power, and runtime for RC racing, off-road driving, and other performance-focused applications.

Choose Your Connector: XT60 or XT90

This Tomahawk 3S 6000mAh 60C LiPo battery is available with two connector options: XT60 or XT90. Select the connector that matches your RC vehicle and ESC setup when placing your order.

• XT60: A widely used high-current connector for many RC applications.
• XT90: A larger high-current connector designed for RC setups requiring a higher-current connection.

Please select the correct connector option for your vehicle before purchasing. Connector options are physically different and are not interchangeable without using a suitable adapter or changing the connector.

Key Features

• 3S 11.1V Configuration: Stable high-voltage output for demanding RC applications.
• 6000mAh Large Capacity: Provides extended runtime for longer driving sessions.
• 60C Continuous Discharge: High-rate output for strong acceleration and responsive throttle performance.
• Five-Sided Metal Armor: Reinforced construction designed to improve impact resistance and structural protection.
• XT60 or XT90 Connector Options: Choose the connector that matches your RC vehicle and ESC setup.
• Low Internal Resistance: Supports efficient power delivery under high-current loads.
• High-Energy 66.6Wh Output: Delivers a combination of strong performance and long-lasting endurance.

Built Tough for High-Performance RC Driving

The Tomahawk 3S 6000mAh battery features a rugged protective structure designed for the demands of RC racing and off-road use. The five-sided metal armor helps protect the battery pack from physical impacts while providing additional structural reinforcement.

Its high-rate cell configuration is designed to maintain stable power delivery during repeated acceleration, high-load operation, and aggressive driving conditions.

Product Specifications

*Maximum continuous current is a theoretical calculation based on 6000mAh × 60C. Actual usable current depends on the battery, vehicle, ESC, wiring, connector, operating conditions, and other system limitations.

Dimensions & Fitment

The battery measures approximately 155 × 45 × 26mm. Before ordering, always compare the battery dimensions with your RC vehicle's battery compartment to ensure proper fitment.

Although this battery is suitable for many 1/8 and 1/10 RC models, compatibility can vary depending on battery tray dimensions, connector type, ESC configuration, and vehicle design.

Recommended RC Applications

• 1/8 scale RC racing models
• 1/10 scale RC racing models
• High-performance RC off-road vehicles
• RC cars requiring 3S 11.1V LiPo power
• RC setups using XT60 or XT90 connectors

Check Before Ordering

Please verify the following before purchasing:

• Your vehicle supports a 3S 11.1V LiPo battery.
• Your ESC is compatible with a 3S LiPo power system.
• Your battery compartment can accommodate 155 × 45 × 26mm.
• You select the correct XT60 or XT90 connector option for your vehicle.
• Your charger supports 3S LiPo batteries and the required charging parameters.

Charging & LiPo Battery Safety

LiPo batteries must be handled, charged, stored, and transported properly. Always use a charger specifically designed for LiPo batteries with the correct cell-count setting.

• Never charge a damaged, swollen, punctured, or leaking battery.
• Never leave a LiPo battery unattended while charging.
• Use a proper LiPo-compatible charger and balance charging whenever required.
• Do not overcharge, over-discharge, short-circuit, or physically damage the battery.
• Store the battery in a cool, dry, and fire-resistant location when not in use.
• Allow the battery to cool after intensive use before charging.

What's Included

• 1 × Tomahawk 3S 6000mAh 60C LiPo Battery
• Connector: XT60 or XT90, according to the option selected

Frequently Asked Questions

Is this battery available with XT60 and XT90 connectors?

Yes. This battery is available with both XT60 and XT90 connector options. Select the connector that matches your RC vehicle and ESC setup.

Which connector should I choose?

Choose the connector that matches the power connector on your RC vehicle or ESC. Before ordering, check your vehicle's connector type and current requirements.

Is the XT60 version different from the XT90 version?

The main difference is the connector type. The battery's core specifications, including the 3S 11.1V configuration, 6000mAh capacity, and 60C discharge rating, remain the same. Choose the connector option that fits your setup.

Is this battery suitable for 1/8 and 1/10 RC cars?

This battery is designed for many 1/8 and 1/10 RC racing and off-road applications. Always confirm your vehicle's battery compartment dimensions and electrical requirements before ordering.

What voltage is this battery?

This is a 3S LiPo battery with a nominal voltage of 11.1V.

What does 60C mean?

The 60C rating indicates the battery's rated continuous discharge capability relative to its capacity. For a 6000mAh battery, 60C corresponds to a theoretical continuous current of up to 360A.

What is the battery size?

The battery measures approximately 155 × 45 × 26mm. Please measure your battery compartment before ordering.

What is the maximum recommended charge rate?

The product specifications indicate a maximum charge rate of 2.5C, equivalent to 15A for a 6000mAh battery. Always follow your charger's instructions and the battery manufacturer's charging guidelines.

Power Your Passion with Tomahawk

The Tomahawk 3S 6000mAh 60C LiPo Battery combines high-rate power, large capacity, rugged protection, and flexible connector options in a performance-focused RC battery pack. Built for demanding RC racing and off-road driving, it is engineered to deliver the power and endurance needed for aggressive driving sessions.