FSR GT 1/7 6S/8S Brushless RC Truck RTR – 4WD High Speed Off-Road Vehicle
FSR MODEL GT / RTR
Choose a color and power system.
Battery and compatible balance charger are sold separately. Use matched LiPo packs and stay within the selected system's voltage limit.
Select 6S or 8S to confirm the compatible voltage range.
Added to cart.
Availability is shown for the selected configuration. Shipping options, delivery timing and final charges are calculated at checkout. Original retail packaging may be replaced with a stronger protective shipping carton; contact Banz RC before ordering if original packaging is required.
Included: RTR vehicle, ESC, brushless motor, steering servo, gyro radio transmitter and receiver, jumper, and user manual.
Required: compatible LiPo battery setup and compatible balance charger, sold separately.
Need help matching battery voltage, configuring the radio, or preparing the first run? Contact Banz RC support with your selected 6S or 8S configuration before powering the vehicle.
Model GT · The driving film
Watch the complete film with sound, then keep scrolling for a closer look at the performance, power and engineering behind Model GT.
Built for the road
Model GT brings a low, wide road-car stance to a 1/7-scale RTR chassis. Four-wheel drive and brushless 6S or 8S power give you the traction and performance to make that presence count.
Model GT · In motion
A low, wide road-car stance comes alive the moment Model GT starts moving.
Road-bred character
Its low, wide body gives Model GT unmistakable road-car presence. Underneath, 4WD traction and brushless 6S or 8S power turn that stance into performance on open pavement.
Choose your power
The chassis stays the same. The electronics and voltage limit change. Compare both setups, choose the performance level you want, then confirm your battery setup with Banz RC.
Your color Choose a color in the configuration area
Both versions: 1/7 scale · 4WD · Brushless · RTR
Responsive 6S power, with the motor, ESC and steering servo matched to this configuration.
Choose a color in the configuration area
Choose a color in the configuration area
Return to the configuration area to choose your system.
Higher-voltage 8S power, with its own motor, ESC and steering servo.
Choose a color in the configuration area
Choose a color in the configuration area
Return to the configuration area to choose your system.
The MODEL GT signature, carried along the sculpted body.
A sweeping roofline, sculpted sides and MODEL GT lettering along the lower body.
A sculpted rear wing, twin stripes and MODEL GT lettering complete the rear profile.
After dark
Low camera angles, wet reflections and a full-width stance give Model GT real presence after dark.
Model GT · Under the body
From its mechanical handbrake to its bracing, motor mount and suspension, explore the engineering details that shape Model GT.
This photo shows the 6S chassis. The 8S version uses different electronics.
View full-size chassis
Road-car presence
Model GT takes its proportions, body lines and signature details from a real road-car reference, giving it convincing GT presence from every angle.
Mechanical handbrake
A lever-driven mechanical linkage gives direct feedback, while rear-wheel locking helps initiate a slide and control its angle.
Diagonal bracing
A 7075-T6 aluminium diagonal brace forms a triangular support, helping spread impact loads through the chassis.
Centre reinforcement
The 6061 aluminium centre brace reinforces the front-to-middle chassis connection to support steering accuracy and suspension geometry.
V2 motor mount & gearing
The V2 motor mount makes room for larger motors, while nine pinion options let you tune Model GT for acceleration or higher theoretical top speed.
Reinforced tyres
An internal fabric layer helps reduce tyre ballooning at high rpm, while wider rear tyres add support for acceleration, braking and cornering.
Road-car presence
Watch the long hood, planted stance and rear wing carry through a fast indoor pass.
Adjustable shocks
Soft, medium and hard springs are supplied so you can match the suspension to smooth asphalt, rough ground or mixed surfaces.
Battery layout & driveline
The 155 × 52mm battery bays give you room to arrange one or two packs around your preferred weight distribution.
Chassis underside
Recessed fasteners and rounded edges keep the chassis underside free from protruding hardware, with a sculpted rear section completing the layout.
Shock towers
7075-T6 aluminium shock towers provide a rigid mounting base for the shocks, helping the suspension maintain its mounting geometry under load.
Linked LED lighting
The brake lights illuminate under braking and the indicators flash with steering input, following the logic of a real car.
Linked LED lighting
See the illuminated front signature and low body lines reflected across the wet surface.
Model GT · Technical specifications
Explore the shared chassis dimensions, then compare the 6S and 8S electronics side by side.
6S and 8S share the dimensions, chassis and drivetrain shown here. Battery and charger are sold separately.
Model GT · Ready-to-run essentials
Model GT is supplied as an RTR vehicle. Choose a power configuration to review its included electronics, then confirm the battery and charger needed to run it.
Model GT is RTR. Battery and charger are sold separately.
6S RTR configuration
Shown from user-supplied Model GT configuration references. Battery and charger are not included.
Battery and charger are sold separately.
A battery setup strictly matched to the selected 6S or 8S configuration, connector requirements and physical fit.
Compatibility pending confirmationA charger verified for the confirmed battery chemistry, cell count, balance connection and required charge lead.
Compatibility pending confirmationOptional upgrades will appear only after current-store compatibility, fit and availability are verified.
Nothing unverified is listed for sale.Model GT · Ownership
Check current fulfilment before dispatch, ask setup questions directly, and add accessories only when their compatibility with Model GT is verified.
Confirm before dispatch
Availability is confirmed against the selected configuration and the order’s current fulfilment route.
International orders may use a stronger protective shipping carton in place of the original retail box. Contact Banz RC before purchase if original packaging is required.
No warehouse, handling-time or delivery-date claim is shown without current order data.Talk to Banz RC
Use chat for 6S/8S selection, battery and charger compatibility, setup questions, and current availability.
Verified accessories will appear here only when fit, connector requirements, configuration and current availability are confirmed.
Compatibility verification pending
Model GT · The road is waiting
Five body finishes. Two brushless power systems. One low, wide Model GT presence.
Current configurationChoose color and power
Current priceChoose configuration
Battery and charger sold separately.
