XC-ESC E10 140A Sensored Brushless ESC for 1/10 RC Cars 2-4S LiPo with Bluetooth App Tuning & Adjustable BEC
XC-ESC E10 140A Sensored Brushless ESC for 1/10 RC Cars 2-4S LiPo with Bluetooth App Tuning & Adjustable BEC
XC Technology E10 Sensored Brushless ESC
The XC Technology E10 is a 140A sensored brushless electronic speed controller for compatible 1/10 RC car setups using 2–4S LiPo batteries. Built-in Bluetooth gives you access to XC-Link app programming, operating data and firmware updates, while smart fan control, adjustable BEC output and IP67 protection support your RC setup.
Key Features
- 140A continuous current capability: Designed for compatible 2–4S LiPo brushless RC car power systems.
- Built-in Bluetooth: Adjust ESC parameters and manage firmware directly through the XC-Link mobile app.
- Smart cooling: The fan remains off at low ESC temperatures and activates when the preset temperature is reached, helping reduce unnecessary fan operation and noise.
- Adjustable BEC: Select 6.0V or 7.4V output, rated at 5A with a 10A maximum, to match compatible receiver and servo requirements.
- Turbo timing: Up to 26° of turbo timing adjustment for motor performance tuning.
- Cycle-by-cycle current limiting: Helps limit excessive current pulses to protect the motor and drivetrain.
- Data monitoring: View real-time operating information and stored run logs in XC-Link. SBUS data upload is also supported.
- Built-in anti-spark protection: Helps protect the ESC and battery during battery connection.
- IP67 protection: Water and dust protection for the ESC.
Choose Your Battery Connector
Available with no battery connector, or with a battery connector soldered to your requested type by Banz RC. For a custom-soldered connector, tell us the connector type you need and confirm the configuration with us before ordering. The connector choice does not change the ESC's 2–4S LiPo input specification.
Specifications
| Brand | XC Technology |
|---|---|
| Model | E10 |
| Product type | Sensored brushless electronic speed controller (ESC) |
| Application | Compatible 1/10 RC car setups |
| Maximum continuous current | 140A |
| Battery input | 2–4S LiPo |
| BEC output voltage | Selectable 6.0V / 7.4V |
| BEC output current | 5A; 10A maximum |
| Programming | Built-in Bluetooth via the XC-Link mobile app |
| Cooling | Temperature-controlled cooling fan |
| Turbo timing | Up to 26° |
| Cycle-by-cycle current limiting | Supported |
| Operating data | Real-time monitoring and stored run logs via XC-Link |
| SBUS data upload | Supported |
| Firmware updates | Supported via the mobile app |
| Built-in anti-spark protection | Supported |
| Ingress protection | IP67 water and dust protection |
| Operating temperature | −25 to 60°C |
| Dimensions (L × W × H) | 52.80 × 39.80 × 35.30 mm |
| Weight | Approximately 118g, including wiring |
| Power wire gauge | 12AWG |
| Motor connector size | 4.0mm bullet connectors |
| Mounting holes | 2 × M2.5; 38.00 mm hole spacing |
| Battery connector | No connector, or a connector soldered to the requested type |
What's Included
- XC Technology E10 ESC with cooling fan, wiring and external switch
- Motor sensor cable
- User manual
Required for Use
A compatible RC car setup, suitable brushless motor, 2–4S LiPo battery and radio system are required. A compatible smartphone with the XC-Link app is needed for Bluetooth programming and app-based functions.
Setup Notes
Check mounting space, motor requirements, connector polarity and battery compatibility before installation. Set the BEC voltage to suit your receiver and servo. Follow the manufacturer's instructions for installation and setup.