Tomahawk 2S 7200mAh 50C Hard Case LiPo Battery – 7.4V
Tomahawk 2S 7200mAh 50C Hard Case LiPo Battery – 7.4V
Extend your RC runtime with the Tomahawk 2S1P 7200mAh 50C Hard Case LiPo Battery. This high-capacity 7.4V battery combines a 50C continuous discharge rating with a five-sided metal-armored hard case for compatible RC crawlers, trucks, off-road vehicles and racing models.
The low-profile rectangular case measures 135 × 44 × 19 mm and is equipped with an T / XT60 power connector. Before purchasing, verify your vehicle's supported voltage, battery-compartment dimensions and connector requirements.
High Capacity for Longer RC Sessions
With a rated capacity of 7200mAh and 53.28Wh of stored energy, this battery is designed for drivers who want longer sessions between charges. It provides a practical balance of capacity, physical size and high-current output for compatible 2S RC power systems.
Five-Sided Metal-Armored Hard Case
The reinforced hard case uses five-sided metal protection designed to provide additional resistance against everyday impacts, scratches, compression and punctures. This construction helps protect the battery during normal off-road driving, crawling, racing and general RC use.
Key Features
- 7200mAh rated capacity: Provides extended runtime for compatible RC vehicles.
- 7.4V 2S1P configuration: Designed for RC systems that support a 2-cell LiPo battery.
- 50C continuous discharge rating: Supports stable high-current delivery for compatible RC power systems.
- 53.28Wh rated energy: High-capacity energy storage in a low-profile rectangular format.
- Five-sided metal-armored hard case: Designed to add physical protection against bumps, impacts and compression.
- T/XT60 connector: Provides a secure connection for compatible RC vehicles and electronics.
- Compact dimensions: The 135 × 44 × 19 mm case is designed to fit compatible RC battery compartments.
Product Specifications
| Brand | Tomahawk Battery |
|---|---|
| Battery Type | Hard Case LiPo Battery |
| Cell Configuration | 2S1P |
| Nominal Voltage | 7.4V |
| Rated Capacity | 7200mAh |
| Continuous Discharge Rating | 50C |
| Rated Energy | 53.28Wh |
| Dimensions | 135 × 44 × 19 mm |
| Rated Weight | 280 g ± 15 g |
| Case Construction | Five-sided metal-armored hard case |
| Power Connector | T/XT60 |
| Balance Lead | Attached 2S balance lead |
Sample Test Data
The following results were recorded from individual sample batteries shown in the supplied product-test images. They demonstrate the tested samples only and are not guaranteed values for every production battery.
- Sample charged capacity: 7351mAh under the displayed test conditions.
- Sample finished-battery weight: 282g.
- Sample cell internal resistance: 1.33mΩ at the displayed cell voltage of 3.873V.
Measurement results may vary with battery condition, state of charge, temperature, test equipment, test method and production tolerances. Product selection should be based on the rated specifications rather than an individual sample result.
Compatible Applications
Designed for compatible RC crawlers, off-road trucks, short-course trucks, racing cars and other RC vehicles that support a 7.4V 2S LiPo battery.
Compatibility depends on voltage, electronic speed controller limits, connector type and physical battery-compartment dimensions. A matching XT60 connector alone does not guarantee compatibility.
Check Before Ordering
- Confirm that your vehicle and ESC support a 7.4V 2S LiPo battery.
- Measure the battery compartment before purchasing.
- Confirm that the 135 × 44 × 19 mm case will fit.
- Confirm that your RC vehicle uses an XT60 connector.
- Review the vehicle manufacturer's battery and ESC requirements.
What's Included
- 1 × Tomahawk 2S1P 7200mAh 50C Hard Case LiPo Battery
- 1 × Attached power connector
- 1 × Attached 2S balance lead
RC vehicle, charger, charging bag and connector adapters are not included.
LiPo Battery Safety
- Use only a charger designed for LiPo balance charging.
- Follow the charging limits printed on the battery label and instructions.
- Never charge or discharge the battery unattended.
- Charge and store the battery in a suitable fire-resistant LiPo bag or enclosure.
- Do not overcharge, over-discharge, short-circuit, puncture, crush or modify the battery.
- Do not use a battery that is swollen, leaking, punctured or physically damaged.
- Allow the battery to cool before charging it after use.
- Keep away from children, pets, moisture, heat and combustible materials.
- Follow applicable local requirements for lithium-battery transport, storage and disposal.
Frequently Asked Questions
Is this a hard-case battery?
Yes. This is a hard-case LiPo battery with a five-sided metal protective shell. It is not sold as a soft-pack battery.
Which connector is installed?
The version described on this page is supplied with an T/XT60 power connector and an attached 2S balance lead.
Will it fit my RC vehicle?
It may fit compatible vehicles that support a 7.4V 2S LiPo battery. Confirm the voltage, ESC limits, T/XT60 connector and 135 × 44 × 19 mm battery dimensions before ordering.
Is the measured capacity always exactly 7351mAh?
No. The 7351mAh result shown in the product image is a test result from one sample under the displayed conditions. The rated product capacity is 7200mAh, and individual measurements may vary.
What charger should I use?
Use a LiPo-compatible balance charger and follow the charging limits shown on the battery label and charger instructions. Never charge unattended.