FSR COOLV 1/8 Scale 170mm Pre-Assembled Beadlock Truck RC Tires & Wheels, 17mm Hex (Pair)
FSR COOLV 1/8 Scale 170mm Pre-Assembled Beadlock Truck RC Tires & Wheels, 17mm Hex (Pair)
FSR COOLV 1/8 Scale Pre-Assembled Beadlock RC Truck Tires and Wheels
FSR COOLV brings together deep tread, distinctive sidewall lettering and a serviceable mechanical beadlock design. Each order contains a pair of tire and wheel assemblies supplied ready for mounting to a compatible vehicle. Nominal scale: 1/8; check the listed vehicle applications and full dimensions for fitment.
Built for Your Next Run
Screw-secured rings hold the tire bead on the wheel and help reduce movement at the joint. The deep tread and wear-resistant rubber are designed for repeated off-road runs, while the sidewall lettering gives the tire a recognizable finish.
The wheel can be separated from the tire to provide access to the foam insert for cleaning. This makes it possible to clear trapped sand and debris instead of treating the assembly as a permanently sealed unit. Check the wheel hex, adapter thickness and the remaining mounting dimensions against your vehicle before ordering.
Key Features
- Screw-secured beadlock: Mechanical rings retain the tire and help reduce movement during demanding runs.
- Access for cleaning: The wheel separates from the tire to provide access around the foam insert.
- Deep tread: The tread and wear-resistant rubber help maintain traction over repeated runs.
- Distinctive sidewall lettering: Visible sidewall lettering gives the tire a clear, recognizable appearance.
- Responsive construction: The tire design is intended to support suspension response and agile steering.
- Assembled beadlock pair: Both tires arrive assembled on their wheels with mechanical beadlock retention. No additional tire glue is required.
Specifications
| Brand | FSR |
|---|---|
| Model | COOLV |
| Nominal scale | 1/8 |
| Overall diameter | 170 mm |
| Tire width | 75 mm |
| Inner rim diameter | 94 mm |
| Tire thickness | 30 mm |
| Wheel hex size | 17 mm |
| Hex adapter thickness | 5.5 mm |
| Weight | 395 g |
| Tire retention | Screw-secured beadlock |
| Assembly | Pre-assembled |
| Additional tire glue | Not required |
Compatible Vehicles
| Compatible with TRAXXAS | Sledge / E-Revo / Summit / Maxx Slash / Maxx |
|---|---|
| Compatible with ARRMA | Kraton 6S / Outcast 6S / Big Rock / Notorious |
Check overall diameter, tire width, wheel hex, wheel offset and clearance before ordering. A matching wheel hex alone does not establish fitment.
What's Included
- Pair of pre-assembled tire and wheel combinations (2 tires with wheels)
Installation and Additional Parts
The tires and wheels arrive assembled with the beadlock rings secured. No additional tire glue is required before fitting the assembly to a compatible vehicle.
Use suitable mounting hardware for your vehicle. If the wheel hex does not match, a suitable adapter may need to be purchased separately. Confirm adapter suitability, wheel offset and body and suspension clearance before fitting.
Follow your vehicle manufacturer's wheel installation instructions. Check that each wheel is securely mounted and rotates freely before driving.
Care and Inspection
Inspect the tire, wheel, beadlock rings and retaining screws before each run. Check for damage or loose parts and address any issues before driving.
When cleaning the assembly, its serviceable construction allows access around the foam insert to remove trapped sand and debris. Reassemble and check the retention hardware before use.